OWIM HG00073B User Manual

21 GB/CY
RESET button twice to deactivate Alarm
2. Press the SET / RESET button once to
deactivate Alarm 1 and Alarm 2.
Using the snooze button
Press the Z
Z
/ REGISTER button
18
while
the alarm signal is sounding to activate
the snooze function.
The alarm signal is silenced and the dis-
plays
or and Z
Z
flash.
The alarm signal sounds again after ap-
prox. 5 minutes.
Press the SELECT button
19
to deactivate
the snooze function.
Displaying temperature
The LC display shows the indoor temperature
6
and the outdoor temperature
2
.
Press and hold down the SELECT button
19
for approx. 3 seconds. The °C dis-
play flashes.
Press the SET / RESET button
20
to switch
between the °C (Celsius) and °F (Fahr-
enheit) temperature scales.
Press the SELECT button to confirm your
settings.
Calling up the minimum /
maximum values
The temperature station stores the maximum
and minimum values of the outdoor sensor
and of the temperature station itself.

OWIM HG00073B Specifications

General

Brand	OWIM
Model	HG00073B
Category	Temperature Controller
Language	English