27 GB
Manually activating signal reception
Activating DCF signal reception
Every night the main station synchronises the internal clock with the
DCF signal. However, you may also activate DCF reception manually.
To do so, press and hold the DOWN- /
button
9
for 3 seconds
until the radio tower symbol
flashes. Following successful reception
the radio tower symbol will be static. If reception fails, the radio tower
symbol
will disappear.
Activating reception from the outdoor sensor
The outdoor sensor will transmit a signal about twice a minute, which
is automatically received by the main station. However, you may also
manually activate reception of the signal. To do so, press and hold the
CH button
15
for three seconds until the channel symbol flashes.
Following successful reception the animation of the symbol will disappear
and the transmitted temperature and humidity will appear in the display.
Background lighting
Touch the SNOOZE- / LIGHT field
2
. The background lighting
illuminates for 10 seconds. While plug in the adapter power have
continuous background lighting. In the battery or mains operation,
there are three levels of background lighting to choose from.
To Next Page
Loading...
Need help?
General
