ECONAVI
To optimise energy saving
ECONAVI
MODE
To select operation mode
AUTO - For your convenience
• Unit selects the operation mode according to
the room temperature.
• Once AUTO mode is selected, the unit will
operate at the standard setting temperature.
Room
temperature
Operation mode
Standard setting
temperature
23˚C & above COOL 25˚C
Below 23˚CDRY 22˚C
Below 20˚C HEAT 21˚C
• Press for “HI” to +2˚C or for “LO” to -2˚C
to the standard setting temperature.
HEAT - To enjoy warm air
• Unit takes a while to warm up. The power
indicator blinks during this operation.
COOL - To enjoy cool air
• To reduce power consumption during COOL
mode, use curtains to screen off sunlight and
outdoor heat.
DRY - To dehumidify the environment
• Unit operates at low fan speed to give a gentle
cooling operation.
POWERFUL/
QUIET
To switch between
powerful & quiet
QUIETPOWERFUL NORMAL
POWERFUL - To reach temperature quickly
POWERFUL
•
This operation will stop automatically after 15
minutes
.
QUIET - To enjoy quiet operation
QUIET
• This operation reduces airfl ow noises.
How to use
Auto OFF/ON button
Use when remote control is misplaced or a malfunction occurs. Raise the front panel:
• To use in AUTO mode, press the button once.
• To use in COOL mode, press and hold the button until 1 beep is heard, then
release.
• Press the button again to turn off.
Press and hold for
approximately
10 seconds to show
temperature setting in
°C or °F.
Press to restore the
remote control to
default setting.
Not used in normal
operations.
FAN SPEED
To select fan speed
(Remote control display)
• For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
Remote control
display
Indicator
POWER
TIMER
ECONAVI
AUTO COMFORT
NANOE-G
POWERFUL/QUIET
(Green)
(Orange)
(Green)
(Green)
(Blue)
(Orange/
Green)
F568955_YT0912-0.indb 6F568955_YT0912-0.indb 6 12/17/2012 4:17:02 PM12/17/2012 4:17:02 PM
To Next Page
Loading...
Need help?
General
