8
To learn more...
Operation mode
HEAT : Unit takes a while to warm up. The POWER indicator blinks during this operation.
COOL: Use curtains to screen off sunlight and outdoor heat to reduce power consumption during COOL mode.
DRY : Unit operates at low fan speed to give a gentle cooling operation.
nanoe-G in-fi lter deactivation
Depending on the unit’s accumulated operation time, nanoe-G in-fi lter deactivation may activate only
once a day after the unit turned off.
To remove the moisture left in the internal parts, the fan will operate for 30 minutes with louver opened
slightly. This process only applicable when the unit is operated in COOL/DRY mode before turned off.
Then, nanoe-G deactivates viruses/bacteria on the fi lter for 2 hours with fan stopped and louver closed.
Do not turn off the power supply during this operation. After power failure, this operation will not resume.
ECONAVI and AUTO COMFORT
or
ECONAVI
AUTO
COMFORT
Note
AIR SWING
When manual AIR SWING is selected,
the ECONAVI and AUTO COMFORT
operations will be cancelled.
The unit will start to initialise
(for approximately 1 minute)
The human activity sensor
and the sunlight sensor will
start to detect.
Human activity sensor operation
Low activity Normal activity
Human
Mode
Set
temperature
High activity Absent
Low activity Normal activity
Human
Mode
Set
temperature
High activity Absent
Set
Fan Speed
HEAT
COOL/DRY
HEAT
COOL/DRY
-2 °C-2 °C
+1 °C
+2 °C
-1 °C
+1 tap
0edLum Fan
+1 tap
-2 °C
+0.3 °C
-2 °C
+2 °C
+1 °C
AUTO COMFORT DeteFtLnJ Kuman preVenFe and aFtLYLt\ tKe unLt FRntrROV rRRm temperature tR Neep Kuman
FRmIRrtaEOe FRnVLVtentO\.
ECONAVI DeteFtLnJ Kuman preVenFe and aFtLYLt\ tKe unLt FRntrROV rRRm temperature tR VaYe enerJ\.
DurLnJ ORZ aFtLYLt\
Ian Vpeed 1 tap up IRr ILrVt 1 mLnuteV Rr untLO Vet temperature LV reaFKed.
DurLnJ Kuman aEVenFe ma[Lmum Ian Vpeed IRr COOL/DRY mRde LV medLum Ian.
F568955_YT0912-0.indb 8F568955_YT0912-0.indb 8 12/17/2012 4:17:05 PM12/17/2012 4:17:05 PM
To Next Page
Loading...
Need help?
General
