6
i AUTO-X
POWERFUL
How to use
Auto OFF/ON button
Use when remote control is misplaced or a malfunction occurs. Raise the front panel:
• To use in AUTO mode, press the button once.
• To use in COOL mode, press and hold the button until 1 beep is heard, then
release.
• To use in HEAT mode, press and hold the button until 1 beep is heard, then
release. And press again until 2 beeps are heard, then release.
• Press the button again to turn off.
CLOCK
MODE
AIR CONDITIONER
OFF/ON
SET CHECK RESET
AC
RC
ON
OFF
SET
CANCEL
123
TIMER
ECONAVI
NANOE-G
MODE
TEMP
FAN SPEED
MILD DRY
AIR SWING
i AUTO-X
AUTO
MILD
DRY
POWERFUL/QUIET
CL
Remote control
display
Press and hold for
approximately
10 seconds to show
temperature setting in
°C or °F.
Press to restore the
remote control to
default setting.
Not used in normal
operations.
Human activity
sensor
Sunlight sensor
and remote
control receiver
Indicator
POWER
TIMER
i AUTO-X
NANOE-G
POWERFUL
QUIET
(Green)
(Green)
(Orange)
(Orange)
(Blue)
(Orange)
(Orange)
i AUTO-X
To reach temperature quickly
(Cooling only)
i AUTO-X
•
The unit controls set temperature according to room
temperature to accelerate room cooling.
Set
temperature
i AUTO-X
-1°C
Max = 4 hours
•
After max 4 hours, the set temperature is shifted
according to activity detection.
•
Fan speed is fi xed at AUTO, fan speed selection is
prohibited.
•
During unit is off, press
i AUTO-X
will turn on the unit
with i AUTO-X mode.
•
i AUTO-X mode can be cancelled by pressing the
respective button again.
MODE
To select operation mode
AUTO - For your convenience
HEAT - To enjoy warm air
COOL - To enjoy cool air
DRY - To dehumidify the environment
FAN - To circulate air in the room
i AUTO-X - To reach temperature quickly (Cooling only)
MILD DRY
To improve humidity and
moisture level
•
This operation reduces air dryness and provides you
with a comfortable living environment during COOL
mode only.
•
When vertical airfl ow direction is set to AUTO, it
stops at lower position to avoid cold air contact.
However, you can adjust the louver direction
manually.
POWERFUL/QUIET
To switch between powerful &
quiet
QUIETPOWERFUL NORMAL
POWERFUL: To reach temperature quickly
POWERFUL
•
This operation stops automatically after 4 hours.
QUIET: To enjoy quiet operation
QUIET
•
This operation reduces airfl ow noise.
FAN SPEED
To select fan speed
(Remote control display)
•
For AUTO, the indoor fan speed is automatically
adjusted according to the operation mode.
•
If i AUTO-X mode is set, fan speed is fi xed to AUTO.
To adjust fan speed, cancel i AUTO-X mode.
F570018-SA0815-1.indb 6F570018-SA0815-1.indb 6 17/08/2015 2:42:45 PM17/08/2015 2:42:45 PM
Process BlackProcess Black