General
Power Supply DC 12V (11V - 16V),
Test Voltage 14.4V
Negative Ground
Current Consumption 29A (at 350W×1)
Speaker Impedance 4 Ω
Power Output (“EIA” Power)
1-CH (Monaural) 350W×1 (10Hz-8000Hz, 1%, 4 Ω)
Maximum Power Output
1-CH (Monaural) 600W×1 (10Hz-8000Hz, 10%)
Total Harmonic Distortion 0.2% (1000Hz, at 10W)
Low Pass Filter 50Hz-250Hz
Bass Boost 0dB-15dB (Middle Frequency: 45Hz)
Subsonic Filter 20Hz, -3dB, 12dB/oct
Signal to Noise Ratio 90dB (IHF, A)
Frequency Response 10Hz-8kHz
Input Sensitivity 0.2V-6V
Input Impedance More than 22kΩ
Dimensions (W×H×D)** 280×62×303 mm
Weight** 4.0 kg
* Specifications and the design are subject to possible modification
without notice due to improvements.
** Dimensions and Weight shown are approximate.
** Above specifications comply with EIA standards.
© 2006 Matsushita Electric Industrial Co., Ltd. All
rights reserved. Unauthorized copying and
distribution is a violation of law.
CY-PAD1003N
Digital Mono Amplifier
AUTOMOTIVE AFTERMARKET
Specifications*
ORDER NO. ACED060946C2
To Next Page
Need help?
General