8
(EN)
Basic operations
1
Start operation.
Press
.
• Pressing after recovery from mains
power failure will resume operation with
the contents before mains power failure
has occurred.
• It is possible to set the screen in Step 2
as the top screen when starting operation.
(P.23 “Display mode”)
In that case, skip Step 2 below.
To stop operation
Press .
2
Check the current operating status.
Press
.
• When no operation is performed for
several seconds, the display returns to the
top screen.
Set
temperature
Fan speed
Flap
Operation
mode
3
Select the item to set.
Press
.
(Repeat)
• When no operation is performed for
several seconds, the display returns to the
top screen.
• “SET TEMP.” (Set temperature) is not
displayed in Fan mode ( ).
SET TEMP.
MODE
FAN SPEED
FLAP
Menu
Top screen
Note
z For models that cannot change the airow direction, “FLAP” is not displayed.
To Next Page
Loading...
Need help?
General
