RQT8317
36
DVD Management
Preparation
•
Release protection (Ô below).
1 While stopped
Press [FUNCTIONS].
2 Press [e,r] to select “To Others” and
press [ENTER].
3 Press [e,r] to select “DVD
Management” and press [ENTER].
Select which step 4 to perform depending on what you want to
do next.
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
After performing steps 1–3 (Ô above)
4 Press [e,r] to select “Disc Name”
and press [ENTER].
Ô page 35, Entering text
• The disc name is displayed in the DVD Management
window.
• With a finalized disc and +RW, the name is displayed on the
Top Menu.
After performing steps 1–3 (Ô above)
4 Press [e,r] to select “Disc
Protection” and press [ENTER].
5 Press [w,q] to select “Yes” and press
[ENTER].
The lock symbol appears closed when the disc is write-
protected.
(with a cartridge)
With the write-protect tab in the protect position, play
automatically starts when inserted in the unit.
After performing steps 1–3 (Ô left)
4 Press [e,r] to select “Delete all titles”
and press [ENTER].
5 Press [w,q] to select “Yes” and press
[ENTER].
6 Press [w,q] to select “Start” and
press [ENTER].
A message appears when finished.
7 Press [ENTER].
Note
• Once deleted, the recorded contents are lost and cannot be
restored. Make certain before proceeding.
• Deleting all video titles will result in all playlists also being deleted.
• Delete does not work if one or more titles are protected.
(New disc only)
Note
After performing steps 1–3 (Ô left)
4 Press [e,r] to select “Format Disc”
and press [ENTER].
5 Press [w,q] to select “Yes” and press
[ENTER].
6 Press [w,q] to select “Start” and
press [ENTER].
A message appears when formatting is finished.
• Do not disconnect the AC mains lead while formatting.
This can render the disc unusable.
• Formatting normally takes a few minutes, however it may
take up to a maximum of 70 minutes ( ).
7 Press [ENTER].
Note
• Formatting cannot be performed on the disc.
• You can format only as DVD-Video format on this
unit.
• When a disc has been formatted using this unit, it may not be
possible to use it on any other equipment.
To stop formatting
Press [RETURN].
• You can cancel formatting if it takes more than 2 minutes. The disc
must be reformatted if you do this.
Common procedures
Providing a name for a disc
Setting the protection
Cartridge–protection
RETURN
e,r,w,q
ENTER
FUNCTIONS
RAM
RAM -R -R DL -RW(V) +R +R DL +RW
To Next Page
Loading...
Need help?
General
