18
TQBA2018
If your wireless router supports WPS (Wi-Fi
Protected Setup
TM
);
You can easily set up a connection by pressing
the green button on the remote control.
If your wireless network is encrypted;
Enter your encryption key (password).
≥ You can switch between capital and lower case
letters by pressing the “Shift” key.
≥ Refer to the owner’s manuals of the hub or router.
≥ Do not use this unit to connect to any wireless network for
which you do not have usage rights.
Using these networks may be regarded as illegal
access.
≥ If you have trouble getting online on your PC after
performing network settings on this unit, perform the
network settings on your PC.
≥ Please be aware that connecting to a network without
encryption may result in the leaking of data such as
personal or secret information.
* An SSID (Service Set IDentification) is a name used by
wireless LAN to identify a particular network. Transmission
is possible if the SSID matches for both devices.
This unit is capable of checking the firmware
automatically when connected to the Internet via
a broadband connection.*
1
When a new firmware version is available, the
following message is displayed.
You cannot operate the unit until the update is
complete. Don’t remove the AC power supply
cord during the update. Removing the AC power
supply cord while the update is in progress may
damage the unit.
After the firmware is installed, “FINISH” will be
displayed on the unit’s display. Unit will restart
and the following screen will be displayed.
≥ You can also download the latest firmware from the
following website and store it to a USB device to
update the firmware.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
≥ To show the firmware version on this unit. (> 34,
“Firmware Version Information”)
≥ Downloading will require several minutes. It may take
longer or may not work properly depending on the
connection environment.
*1
You must agree to the terms of use for the Internet function
and the privacy policy. (> 33, “Notice”)
*2
“X.XX” represents the firmware version number.
Reprogramming the
remote control
You can operate the TV using the unit’s remote
control.
1 Input the 2-digit code (> 42) while
pressing [Í] of TV operation button on the
remote control.
e.g., 01: [0] B [1]
2 Test by turning on the television.
≥ If your television brand has more than one code listed,
select the one that allows correct operation.
Firmware updates
l
#
*
@
.
Symbols
Encryption Key (Password)
Shift
Delete
Finish
Alphanumeric Other Characters
(QWHUFDVHVHQVLWLYH
“;,-_
~
:/
Space
`
OK
RETURN
3 6 92 5 8 01 4 7
Firmware Update
Current Version: X.XX
New Version: X.XX
Do you want to start firmware update?
For the update information, please visit the
following website:
http://panasonic.net/support/
NoYes
OK
RETURN
2
The firmware was updated.
Current Version:
x.xx
DMP-UB900_P-TQBA2018.book 18 ページ ２０１６年６月８日 水曜日 午後４時４９分
To Next Page
Loading...
Need help?
General
