- 51 -
Advanced (Recording pictures)
[REC] Mode: ¿
Taking pictures that match the scene being
recorded (Scene Mode)
When you select a Scene Mode to match the subject and recording situation, the camera
sets the optimal exposure and hue to obtain the desired picture.
Slide the [REC]/[PLAYBACK] selector switch to [!], and then press
[MODE].
Press 3/4 to select [SCENE MODE], and then
press [MENU/SET].
Press 3/4/2/1 to select the Scene Mode.
• You can switch menu screens from any menu item by rotating
the zoom lever.
Press [MENU/SET] to set.
• The menu screen is switched to the recording screen in the
selected Scene Mode.
∫ About the information
• If you press [DISPLAY] when selecting a Scene Mode, explanations
about each Scene Mode are displayed. (If you press [DISPLAY] again,
the screen returns to the Scene Mode menu.)
Note
• To change the Scene Mode, press [MENU/SET] and then press 1, and return to step 3.
• The Scene Mode flash setting is reset to the initial setting when the Scene Mode is changed.
• When you take a picture with a Scene Mode that is not adequate for the purpose, the hue of the
picture may differ from the actual scene.
• The following items cannot be set in Scene Mode because the camera automatically adjusts
them to the optimal setting.
– [SENSITIVITY]
–[COLORMODE]
To Next Page
Loading...
Need help?
General
