31
VQT3A36
Preparation
Setting Date/Time (Clock Set)
• The clock is not set when the camera is shipped.
Turn the camera on.
• The status indicator 1 lights when you turn this unit
on.
A [MENU/SET] button
Press [MENU/SET].
Press 2/1 to select the items (year, month,
day, hour, minute, display sequence or time
display format), and press 3/4 to set.
A: Time at the home area
B: Time at the travel destination (P115)
‚: Cancel without setting the clock.
Press [MENU/SET] to set.
Press [MENU/SET].
• After completing the clock settings, turn the camera off. Then turn the camera back on,
and check that the display reflects the settings that were performed.
• When [MENU/SET] has been pressed to complete the settings without the clock having
been set, set the clock correctly by following the
“Changing the clock setting” procedure.
Select [CLOCK SET] in the [SETUP] menu, and press 1. (P55)
•
It can be changed in steps 3, 4 and 5 to set the clock.
• The clock setting is maintained for 3 months using the built-in clock battery even
without the battery. (Leave the charged battery in the unit for 24 hours to charge the
built-in battery.)
Note
•
The clock is displayed when [DISPLAY] is pressed several times during recording.
• You can set the year from 2000 to 2099.
• If the clock is not set, the correct date cannot be printed when you stamp the date on the
pictures with [TEXT STAMP] (P144) or order a photo studio to print the pictures.
• Be sure to set the correct date and time, otherwise the date stamp will be incorrect when the
picture is printed.
Changing the clock setting
:
:
DMC-GH2H&GH2K&GH2PP-VQT3A36_eng.book 31 ページ ２０１０年１０月１９日 火曜日 午前１１時３分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
