Recording
26
SQT0790 (ENG)
When [iHDR] is set to [ON] and there is, for example, strong contrast between the
background and the subject, multiple still pictures are recorded with differing exposures
and combined to create a single still picture rich in gradation.
[iHDR] works automatically as needed. When it does, [ ] is displayed on the screen.
Recording Mode:
You can easily set the blurriness of the background while checking the screen.
1 Press [Fn7] to display the setting screen.
2 Set the blurriness by rotating the rear dial.
•
If you press [MENU/SET], you can return to the recording
screen.
• Pressing [Fn7] on the blurriness setting screen will cancel
the setting.
Recording Mode:
This mode enables you to change the brightness (Exposure) and colour tone to your
preferred settings from the ones set by the camera.
∫ Setting brightness (Exposure)
Rotate the exposure compensation dial to select
the brightness (Exposure).
∫ Setting colour
1 Press 1 to display the setting screen.
2 Rotate the rear dial to adjust colour.
•
This will adjust the colour of the image from a reddish
colour to a bluish colour.
• Press [MENU/SET] to return to the recording screen.
Combining pictures into a single picture with rich gradation ([iHDR])
> [Rec] > [iHDR] > [ON]/[OFF]
Taking a picture with a blurred background (Defocus Control)
Recording images by changing the brightness (Exposure) or colour tone
SSSSSS
FF
250500
4.0 5.6 8.0
3060125
DMC-GX8A&GX8H&GX8K_GCGH-SQT0790_eng.book 26 ページ ２０１５年７月８日 水曜日 午前９時１１分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
