21
(ENG) VQT2M30
Charging the Battery
∫ About batteries that you can use with this unit
The battery that can be used with this unit is DMW-BCF10PP.
•
Use the dedicated charger and battery.
• The camera has a function for distinguishing batteries which can be used
safely. The dedicated battery (DMW-BCF10PP) supports this function. The
only batteries suitable for use with this unit are genuine Panasonic
products and batteries manufactured by other companies and certified by
Panasonic. (Batteries which do not support this function cannot be used).
Panasonic cannot in any way guarantee the quality, performance or safety
of batteries which have been manufactured by other companies and are
not genuine Panasonic products.
∫ Charging
•
The battery is not charged when the camera is shipped. Charge the battery
before use.
• Charge the battery with the charger indoors.
• It is recommended to charge the battery in a temperature between 10 oC to
35 oC (50 oF to 95 oF). (The battery temperature should also be the same.)
It has been found that counterfeit battery packs which look very similar
to the genuine product are made available to purchase in some
markets. Some of these battery packs are not adequately protected with
internal protection to meet the requirements of appropriate safety
standards. There is a possibility that these battery packs may lead to
fire or explosion. Please be advised that we are not liable for any
accident or failure occurring as a result of use of a counterfeit battery
pack. To ensure that safe products are used we would recommend that
a genuine Panasonic battery pack is used.
Attach the battery paying
attention to the direction of the
battery.
Connect the charger to the
electrical outlet.
• Disconnect the charger from the
electrical socket and detach the battery
after charging is completed.
DMC-FT2&TS2P-VQT2M30_eng.book 21 ページ ２０１０年１月２９日 金曜日 午後５時３１分
To Next Page
Loading...
Need help?
General
