7
8
Preparation before washing Parts identification of the washing machine
Water inlet valve
Door
Control panel
Cabinet
Adjustable foot knob
Top cover
Accessories
Base cover
Only for lower drain hose
Fixing ring (1) is used
for the fixing in time of
the installation of the
lower drain hose.
Universal connector
Water inlet hose assembly
Self-tapping screw
Only for model with single
screw thread water inlet pipe
！
NOTICE
Adjust the adjustable foot to
make the washer be placed
stable.
1
Adjustable foot (extend when
clockwise rotating and shorten
when counterclockwise rotating)
(Slightly incline the washer first and loosen the
adjustable foot knob. Adjust the adjustable foot so
as to ensure four corners of washer be steadily
contacted with the ground. Then tighten the
adjustable foot knob and lock it. If the ground is
obviously not flat, correction should be made on
the ground surface, otherwise the washer tub
will incline and knock the cabinet)
Connect with to
power source.
3
4
+
+
Put down the drain
hose.
5
Gravity drain
Put in
clothes
and
suitable
amount of
washing
powder.
6
Install the water
inlet hose.
2
+
+
For one inlet hose
Before washing, please do take out coins,
keys and other hard goods, and zip up clothes
and
tub from damage.
tightly to prevent them
Turn on the
water supply.
Please refer to the real material as the attachment
Only for models including
base cover
To Next Page
Loading...
Need help?
General