IMPORTANT SAFETY INSTRUCTIONS 2
Listening caution 3
Product service 3
Supplied accessories 4
Connections 4
Control guide 5
Disc operations 6
Radio operations 7
Timer 7
Sound adjustment 7
External unit 8
Troubleshooting guide 9
Memory reset (Initialization) 9
Maintenance 9
Specifications 10
Limited Warranty 11
Table of contents
Connections
Avoid listening for prolonged periods of time to prevent hearing
damage.
Excessive sound pressure from earphones and headphones can
cause hearing loss.
Listening at full volume for long periods may damage the user’s
ears.
Be sure to use the supplied or recommended headphones or
earphones.
•
•
•
Reduce the volume level and connect the headphones.
Plug type: 3.5 mm (1/8") stereo
Headphones (not included)
4
g Notes on speakers
These speakers do not have magnetic shielding. Do not place
them near televisions, personal computers or other devices easily
influenced by magnetism.
The speaker nets cannot be removed.
•
•
g Placing the unit
Keep a minimum of 50 mm (1
31
/
32
") clearance space at the front of
the unit to prevent iPod/iPhone or the unit from dropping.
•
3
Connect the AC power supply cord
after all other connections are
complete.
Connect the AC power supply cord.
To household AC outlet
Please check and identify the supplied accessories.
Use numbers indicated in parentheses when asking for
replacement parts. (Product numbers are correct as of
January 2010. These may be subject to change.)
To order accessories, call the dealer from whom you have made
your purchase.
Supplied accessories
1 AC power supply cord
(K2CB2CB00021)
1 AM loop antenna
(N1DYYYY00010)
1 Remote control
(N2QAYB000518)
1 FM indoor antenna
(RSAX0002)
The included AC power supply cord is for use with this unit only.
Do not use it with other equipment.
Do not use an AC power supply cord of other equipment.
•
•
Portable audio equipment (during AUX mode)
5
Connect the AM loop antenna.
2
Stand the antenna
up on its base.
AM loop antenna
Keep the loose antenna cord away from other wires and cords.•
Click!
Tape the antenna to a wall
or column, in a position
with the least amount of
interference.
•
FM indoor
antenna
Connect the FM indoor antenna.
Adhesive tape
1
Plug the audio cord into the AUX jack.
Plug type: 3.5 mm (1/8") stereo
Press [AUX] and start playback from the portable
audio source.
You can select the sound input level of the portable audio
equipment.
Press [INPUT LEVEL] repeatedly to select “HIGH” or
“NORMAL”.
Switch the equalizer off or turn the volume of the portable
equipment down to reduce the input signal. High level of input
signal will distort the sound.
For details, refer to the instruction manual of the other equipment.
Cords and equipment are not included.
•
•
•
4 5
Ventilation holes
Back View
3
45
1
2
To Next Page
Loading...
Need help?
General
