Name: Panasonic SC-HTB400
Brand: Panasonic
Rating: 4 (1 reviews)

To Next Page

To Previous Page

TQBJ2216

Overview of controls

Do the procedure with the remote control. You can also use the buttons on the main unit if they

are the same.

A Standby/on switch [1]

Press to switch the unit from on to standby

mode or vice versa. In standby mode, the unit

is still consuming a small amount of power.

B Adjust the volume level (~18)

C Select the input source

[HTB400]

[HTB600]

D Select the Bluetooth

device as the source

(~17)

To start Bluetooth

pairing, press and hold

[].

E Display panel

F Remote control sensor

Point the remote control at the remote control

sensor, away from obstacles and within the

operation range.

Distance: Within approximately 7 m

Angle: Approximately 20° up and down, 30° left

and right

G [HTB600]

WIRELESS LINK indicator (~17)

Note:

• Do not place objects in front of this system.

• Do not place objects on top of the main unit.

Do not block the top surface of the main unit for proper

ventilation.

• Remove dust and dirt from this system regularly. (~23)

[HTB600]

Main Unit (Front)

Active subwoofer (Front)

TV BT

HDMI

htb600.400_TQBJ2216_en.fm Page 5 Thursday, May 14, 2020 2:22 PM

Questions and Answers:

Need help?

Do you have a question about the Panasonic SC-HTB400 and is the answer not in the manual?

Panasonic SC-HTB400 Specifications

General