13
English
Question Answer
What make-up removers
can be used with this
appliance?
You can use whichever oil-, gel-,
and cream-based type of make-up
remover that works for your skin.
(Do not use make-up removers
containing coarse materials for
scrubbing or those used for
exfoliation.)
How often does the soft
brush need replacing?
Approximately every 3 months if
used once per day.
How often does the pore
focus brush need
replacing?
Approximately every 6 months if
used twice per week.
How many times per day
can I use the appliance?
You can use the warming make-
up removal and brush cleansing
modes once per day. Use the
pore-targeted cleansing mode
twice per week.
Is it OK if the inside of the
socket cover gets wet?
The socket is waterproof for
normal usage. Before charging,
however, wipe off any water in
the socket.
Can I also use this on my
neck?
You can use the soft brush for
1 minute once per week.
Will the battery
deteriorate if not used for
an extended period of
time?
The battery will deteriorate if not
used for over 6 months, so make
sure to perform a full charge at
least once every 6 months.
How to use
• Make sure the warming make-up removal plate is not cracked
or dirty before use.
•
The appliance will not operate when connected to the AC
adaptor. The AC adaptor is used only for charging the appliance.
Warming make-up removal
The warming make-up removal plate loosens and easily
removes make-up.
1
1
Press the warming make-up removal switch and
select the desired temperature.
Warming make-up removal plate temperature options
Low (
): approx. 43 °C
High (
): approx. 48 °C
•
Pressing the warming make-up removal switch cycles
through the “Power OFF”
“Low ( )” “High ( )” options.
• The temperature is always set to “Low ( )” when the power
is turned on.
• It is recommended to use the appliance at the “Low (
)”
setting when first beginning use.
Notes
• The warming make-up removal mode indicator flashes
while warming up.
• It takes approximately 30 seconds for the appliance to
reach its usable temperature. (Assuming a room
temperature of 25 °C)
• The warming make-up removal plate temperature varies
depending on the usage environment.
•
The set temperature may not be reached if the ambient
temperature is below 15 °C.