8
3. Raise the output tray to avoid the paper from slipping and falling.
4. Load the paper into the automatic feeder tray with the print-side up.
• Before loading paper, please unfold the stacked paper to avoid a paper jam or feed
error,and then load the paper into the tray print-side up.
5. Adjust the paper stop to keep the paper in position. To ensure normal paper feeding, adjust the
bottom paper stop ① into the slot to keep it from slipping out, and then adjust the blue stop② to
match the paper size.
• If the paper loaded into the automatic feeder tray at one time exceeds 150 pages, paper
will jam or cannot be fed in.
• When using the printed paper, please make the side to be printed (the blank side) up.
• When printing on A5 paper, it is recommended that the paper is fed in landscape
orientation, which can extend the service life of the laser toner cartridge.
To Next Page
Loading...
Need help?
General
