Paradox RTX3 User Manual

Page 10 Programming
* For instructions on entering 3-digit RTX3 section numbers see RTX3
Programming Sections for EVO Panels
on page 10.
RTX3 Programming Sections for EVO Panels
Section Feature Details
[001] Option
[1]
Low battery
supervision
For RTX3 version 1.5 and higher, this
option is always on
ON: default
[2]
Check-in
supervision
OFF: default
[3]
Check-in
supervision time
interval
OFF: 24 hours (default)
ON: 80 minutes
[4]
RF Jamming
supervision
OFF: default
[5]
On-board
module tamper
supervision
OFF: default
[6]
PGM1 initial
state
OFF: Normally Open (default)
ON: Normally Closed
[7]
PGM2 initial
state
OFF: Normally Open (default)
ON: Normally Closed
[8]
Transmit tamper
signal
OFF: RTX3 ignores tamper signal
(default)
ON: RTX3 reports tamper signal
[002]
Remote Control Options
[1]
REM2 visual and
auditory
feedback
compatibility
options*
OFF: Old visual and auditory feedback
(Supported by REM2 v2.00 or
lower)
ON: New visual and auditory feedback
(default)
Note: Requires REM2 v2.01 and higher

Paradox RTX3 Specifications

General

Brand	Paradox
Model	RTX3
Category	Computer Hardware
Language	English