User Quick Reference Guide
1689 LED Keypad / 1641BL LCD Keypad
KEYPAD OVERVIEW
To arm
when leaving...
To arm
when staying...
1689 LED Keypad
PRINTED IN CANADA - 01/06
www.paradox.ca
Security Company:
Stay Lights
(for Stay & Instant arming)
ON = area 1 or 2 armed
OFF = area 1 or 2 disarmed
FLASH = area 1 or 2 in alarm
1641BL LCD Keypad
Zone Display
The numbers represent zones 1
to 16. When illuminated, the
zones are open or breached.
FNC1 Key
Your system may have one or
more home-automation options.
One of these options may be
triggered directly from the
keypad. Press and hold [
FNC1] for
3 seconds to activate:
___________________________
(i.e. reset smoke detector,
activate lights, etc.)
Arrow Keys
Use the arrow keys to scroll
menu or choices.
Arm Lights
(for Regular & Force arming)
ON = area 1 or 2 armed
OFF = area 1 or 2 disarmed
FLASH = area 1 or 2 in alarm
AC Light
ON = AC power
OFF = power failure
Status Light
Green
ON = zones closed
OFF = zone(s) open
FLASH = exit delay
Red (1641BL only)
ON = system armed
FLASH = stay armed
FAST FLASH = alarm
Made a mistake?
Press [
CLEAR] to delete an entry
or revert to last step.
ARMING AND DISARMING
Regular Arm:
Arm entire area when all zones are
closed.
Enter your [
ACCESS CODE]*.
(or press and hold [ENTER] for 3
seconds)
†
.
Force Arm:
Arm area without waiting for all zones to
close.
Press [
FORCE] and then enter your
[ACCESS CODE]*.
(or press and hold [FORCE] for 3
seconds)
†
.
Stay Arm:
Arm area’s perimeter, which allows you to
remain in the protected area.
Press [
STAY]* and then enter your [ACCESS
CODE]*.
(or press and hold [STAY] for 3 seconds)
†
.
Instant Arm:
Area is stay armed, but an alarm occurs
instantly if any armed zones are
breached.
Stay arm and then press and hold [
STAY
]
for 3 seconds during the Exit Delay.
Disarming:
Enter your [ACCESS CODE]*.
* If needed, press the key(s) corresponding to the desired area(s). For two areas, press the other
key after the confirmation beep.
†
The One-Touch Arming feature must be enabled by your installer.
1689_41-EQ01
LCD Screen
Messages on the LCD screen
will guide you through the
operations.
1689_41-EQ01.qxd 1/31/2006 10:07 AM Page 1
To Next Page
Need help?
General
