K641+-EQ00
Printed in Canada - 02/2014 PARADOX.COM
Quick Start
K641+ Keypad
How To Arm
Arming When Exiting (Regular/Force Arm)
To arm your system when exiting:
Arming When Staying (Stay/Instant Arm)
To arm your system when staying:
LCD (displays system
status and messages)
Arrow keys (use to scroll the
menu options)
AC light (ON = power ON;
OFF = power OFF)
Status light (ON = zones closed
OFF = zones open
Flash = exit delay)
Enter key (saves current
data and exits current menu)
ACC key (press for 2 seconds
to perform an action without
entering an access code)
Clear key (erases current
data entry or reverts
to preceding step)
Step Description
1. Enter your [ACCESS CODE].
• To Regular arm, press the [ARM] key
(arms entire area when all zones are
closed).
• To Force arm, press the [
FORCE] key
(arms entire area without waiting for
all zones to close).
2. Select the desired area or press the [0]
key for all areas.
Step Description
1. Enter your [ACCESS CODE].
•To Stay arm, press the [STAY] key
(arms area’s perimeter only, which
allows you to remain in the
protected area).
• To Instant arm, press the [5] key
(stay arms the area but an alarm will
occur instantly if any zone opens).
2. Select the desired area or press the [0]
key for all areas.
To Next Page
Need help?
General