6 GB/IE/CY
Introduction
Combination Cutter PSFS 250 A1
Introduction
Congratulations on your new product. You have
selected a high quality product. The instructions for
use are a part of this product. They contain impor-
tant information about safety, use and disposal. Be-
fore using the product, please familiarise yourself
with all the operating and safety instructions. Only
use the product as described and for the indicated
purpose. When passing this product on to others
please be sure to also include all of its documentation.
Intended use
This device - used with the recommended tools and
accessories - is designed to work on materials such
as wood, plastic, light metal sheets, fibreboards and
wall tiles. It is also suitable for grinding using various
cylindrical grinders and for milling using milling bits
with a shank diameter of 4.8 mm. Any other use or
modifying the device is considered improper use and
involves considerable accident risks. The manufac-
turer is not liable for damage caused by improper
use. Not intended for commercial use.
Features
1
Locking switch
2
Variable speed control
3
Mains lead
4
ON / OFF switch
5
Wing setscrew
6
Dust extraction nozzle
7
Base plate
8
Collet
9
Wing bolt (base plate)
10
Clamping nut
11
Spindle lock button
12
Louvres
13
Stop plate
14
Open-ended spanner
15
Circle / parallel cutting guide
16
Sanding belts
17
Slot cutter (HSS)
18
Multi-purpose cutter (HSS)
19
Adapter (dust extraction nozzle)
Scope of delivery
1 Combination cutter PSFS 250 A1
1 Parallel fence with circle cutting function
1 Dust extraction adapter
1 Open-ended spanner
1 Multi-purpose cutter (HSS)
1 Slot cutter (HSS)
1 Sanding belt tensioning arbor
6 Sanding belts
1 Operating instructions
Technical Data
Rated power input: 250 W
Voltage: 230 V∼, 50 Hz
Idle speed (n
0
): 10.000–28.000 rpm
Collet capacity: 4.8 mm
Protection class: II /
Noise and vibration data:
Noise value determined according to EN 60745.
The A-rated noise level of the electric tool is typically:
Sound pressure level: 75 dB(A)
Sound power level: 86 dB(A)
Uncertainty K: 3 dB(A)
Wear hearing protection!
Evaluated acceleration, typically:
Hand- / arm vibration a
h
< 2.5 m / s
2
Uncertainty K = 1.5 m / s
2
The vibration level specified in
these instructions was measured in accordance
with an EN 60745 standardised measurement pro-
cess and can be used to compare equipment. The
vibration emission value specified can also serve as
a preliminary assessment of the exposure.
The vibration level will change according to the ap-
plication of the electrical tool and in some cases,
may exceed the value specified in these instructions.
To Next Page
Loading...
Need help?
General
