26 GB
Safety guidelines for using cutting
attachment
Keep your hands clear of the cutting area and the cutting blade.
Before carrying out any work on the appliance, ensure that
the rotation direction switch is in the middle. This prevents
unintentional switching on.
Do not cut unless the blade guard is fully functional. Defective
blade guards will not protect you against unintentional contact
with the cutting blade.
Before each use, check whether the blade guard is in perfect
condition and that the cutting blade is firmly fitted.
Always use cutting blades of the correct size and with an
appropriate central fixing bore.
Vibration and noise reduction
To reduce the impact of noise and vibration emission, limit the time of
operation, use low‑vibration and low‑noise operating modes as well
as wear personal protective equipment.
Take the following points into account to minimise the vibration and
noise exposure risks:
Only use the product as intended by its design and these
instructions.
Ensure that the product is in good condition and well
maintained.
To Next Page
Loading...
Need help?
General
