GB NIIE CY
7
34 Guide roller
35 Guide pin mounting screw
D Set the band saw blade per-
pendicular to the saw table
36 Support screw
37 Locking nut
Technical data
Band saw PBS 350 B2
Rated voltage (U) 230 V~ 50 Hz
Rated output (P) 350 W (S1)*
Mains connection cable length 3 m
Protection class I
Protection type IPX0
Weight 16 kg
Length of the band saw blade 1400 mm
Width of the band saw blade 7 mm
Idle speed n
0
1500 min
-1
Cutting capacity 80 mm (90°);
50 mm (45°)
Sound pressure level (L
pA
) 75.6 dB(A)
Sound power level (L
WA
) 88.6 dB(A),
K = 3.0 dB
*Operating mode S1: Continuous operation
with constant load
Noise levels were determined according to
the norms and regulations in the declara-
tion of conformity.
Safety information
This section deals with the basic safe-
ty instructions for using the machine
⚠ WARNING! Read the instruc-
tion manual carefully before use.
Keep the instruction manual for
subsequent consultation.
CAUTION!The following basic
safety precautions must be ob-
served while using power tools to
protect against electric shock, inju-
ry and risk of fi re.
This machine must not be used by
children. This machine can be used
by individuals with reduced physi-
cal, sensory or mental abilities or a
lack of experience and knowledge
if they are supervised or have been
instructed in the safe use of the
machine and understand the result-
ing hazards. Children must never
play with the machine
Meaning of the safety
information
⚠ DANGER! If you do not observe this
safety instruction, an accident will occur.
The result of which is severe bodily injury
or death.
⚠ WARNING! If you do not observe this
safety instruction, an accident may occur.
The result of which is likely severe bodily
injury or death.
⚠ CAUTION! If you do not observe this
safety instruction, an accident will occur.
The result of which is likely minor or moder-
ate bodily injury.
NOTE! If you do not observe this safety in-
struction, an accident will occur. The result
of which is possible damage to property.