GB
18
Wall mounted charger
(optional)
You can also mount the charger (5) on the
wall.
-
zontally 152.4 mm (6”) apart at the
desired position on a wall.
of 7 - 10 mm.
a distance of approx. 10 mm from the
wall.
you can attach the charger (5) to the
two screws and pull the charger down
until it stops.
When drilling, be careful not
to damage any supply lines.
Use suitable search devices
to nd these or consult an in-
stallation plan for guidance.
Contact with electrical cables
can lead to electric shock and
re. Contact with a gas pipe
can result in an explosion.
Damage to a water pipe can
lead to property damage and
electric shock.
Cleaning
Clean the charger (5) with a dry brush or
dry cloth.
Keep the charger (5) away from moisture
Maintenance
Disposal/environmental
protection
Remove the battery from the device and
take the device, battery, accessories and
packaging for environmentally friendly
recycling.
Electrical devices do not belong in
waste bin symbol means that this
product must not be disposed of
with household waste after its servi-
ce life.
Directive 2012/19/EU on waste electrical
and electronic equipment: Consumers are
legally obliged to recycle electrical and
electronic equipment in an environmentally
sound manner at the end of its life. In this
way, environmentally friendly and resour-
ce-saving recycling is ensured.
Depending on the implementation in na-
tional law, you may have the following
options:
point,
with the old devices or tools without any
electrical components.
Do not throw batteries into domestic
-
ter. Damaged batteries can harm
the environment and your health if
poisonous fumes or liquids escape.
Dispose of the batteries according to local
standards. Defective or used batteries must
be recycled in accordance with Directive
2006/66/EC. Hand in the batteries at a
used battery collection point where they
To Next Page
Loading...
Need help?
General
