Parkside PTS 710 B2 User Manual

22 GB/IE/NI
 Switching on and off
Switching on
 Activate the safety lock-out
[2] and keep it in
that position.
 Press the on/off switch
[3]. Once the product
is running, release the safety lock-out
[2].
Switching off
 Release the on/off switch
[3].
m
CAUTION! RISK OF INJURY!
Always wear protective gloves when
handling or working with the product.
m
CAUTION! RISK OF INJURY AND
DAMAGE TO PROPERTY!
u Wear gloves when handling the saw blade.
In this way, you avoid injury from cuts.
u Do not use any blunt or bent blades or
blades which are damaged in any other
way.
u Before sawing the workpiece, check for
hidden foreign objects such as nails,
screws. These must be removed.
u Always insert a suitable saw blade.
u Secure the workpiece with the aid of
clamping devices on the workbench.
u Apply only as much pressure as is required
for sawing. If there is excessive pressure,
the sawing blade may bend and break.
u Switch the product off immediately if the
sawing blade jams.
Spread the saw cut out and pull the blade
out carefully.
u Always stand to the side of the product
when working.
u Always make sure that the workplace is
well ventilated.
u Avoid over-stressing the product while
working.
 Selecting the cutting depth
NOTE
u We generally recommend setting the
cutting depth to approx. 2 mm more than
the thickness of the material. This ensures
that you achieve a clean cut.
 Let go of the quick-release lever of the cutting
depth pre-selector
[9].
 Set the desired cutting depth on the scale
[8].
 Clamp the quick-release lever tight again.
 Fitting the rip fence
 Loosen the screw for the rip fence [] on the
base plate
[7].
 Insert the rip fence
[] into the rip fence
slot
[]. Retighten the screw for the rip
fence
[].
 Handling the circular saw
 Place the product on the material. If
necessary, align the product with the rip
fence
[] or on a marked line.
 Activate the safety lock-out
[2] and keep it in
that position. Press the on/off switch
[3].
 Press the product forward to lower the circular
saw. You can now release the safety lock-out
[2].
 Saw by applying moderate pressure.

Parkside PTS 710 B2 Specifications

General

Brand	Parkside
Model	PTS 710 B2
Category	Saw
Language	English