Parkside PWSA 20-Li B3 Translation Of The Original Instructions

PWSA 20-Li B3
GB
│
IE
│
NI
│
3 ■
Package contents
1 cordless angle grinder
1 additional handle
1 blade guard (pre-assembled)
1 two-hole mounting spanner
1 cutting disc (pre-assembled)
1 set of operating instructions
Technical details
Cordless angle grinder: PWSA 20-Li B3
Rated voltage: 20 V
(DC)
Rated idle speed: n 2500–10000 rpm
Disc width: Ø 125 mm
Thread size: M14
Battery: PAP 20 A3*
Type: LITHIUM ION
Rated voltage: 20 V
(DC)
Capacity: 4 Ah
Cells: 10
High-speed battery charger: PLG 20 A3*
INPUT:
Rated voltage: 230–240 V
~
, 50 Hz
(AC)
Rated power
consumption: 120 W
Fuse (internal): 3.15 A
T3.15A
OUTPUT:
Rated voltage: 21.5 V
(DC)
Rated current: 4.5 A
Charging time: approx. 60 min
Protection class: II /
(double insulation)
* BATTERY AND CHARGER ARE NOT INCLUDED
Noise and vibration data:
Noise measurement value determined in accord-
ance with EN 60745. The A-rated noise level of
the power tool is typically:
Noise emission value:
Sound pressure level: L
PA
= 83 dB(A)
Uncertainty: K = 3 dB
Sound power level: L
WA
= 94 dB(A)
Uncertainty: K = 3 dB
Wear ear muffs!
Total vibration value:
Surface grinding main handle: a
h, AG
= 2.698m/s
2
Uncertainty: K = 1.5 m/s
2
Surface grinding
Additional handle: a
h, AG
= 3.284 m/s
2
Uncertainty: K = 1.5 m/s
2
NOTE
► The vibration level specified in these instruc-
tions has been measured in accordance with
a standardised measuring procedure and
can be used for equipment comparisons. The
specified vibration emission value can also be
used to make an initial exposure estimate.
WARNING!
► The vibration level varies depending on the
use of the power tool and may be higher
than the value specified in these instructions
in some cases. Regular use of the power tool
in this way may cause the user to underesti-
mate the vibration. Try to keep the vibration
loads as low as possible. Measures to reduce
the vibration load are, e.g. wearing gloves
and limiting the working time. Wherein all
states of operation must be included (e.g.
times when the power tool is switched off and
times where the power tool is switched on but
running without load).

Parkside PWSA 20-Li B3 Specifications

General

Brand	Parkside
Model	PWSA 20-Li B3
Category	Grinder
Language	English