PWSA 20-Li F4
GB
│
CY
│
9 ■
Safety guidelines for battery
chargers
■ This appliance may be used by
children aged 8 years and above
and by persons with limited phys-
ical, sensory or mental capabili-
ties or lack of experience and
knowledge, provided that they
are under supervision or have
been told how to use the appli-
ance safely and are aware of
the potential risks. Do not allow
children to use the appliance as
a toy. Cleaning and user mainte-
nance tasks may not be carried
out by children unless they are
supervised.
■ To avoid potential risks, damaged
mains cables should be replaced
by the manufacturer, their
customer service department or
a similarly qualified person.
The charger is suitable for indoor use only.
WARNING!
■ To avoid potential risks, damaged mains
cables should be replaced by the manufac-
turer, their customer service department or a
similarly qualified person.
ATTENTION!
♦ This charger can only charge the following
batteries:
PAP20A1/PAP20A2/
PAP20A3/PAP20B1/PAP20B3/
PAPS204A1/PAPS208A1.
♦ A current list of battery compatibility can be
found at www.lidl.de/Akku.
Permissible accessories
Max. diameter Ø (mm)
Max. thickness (mm)
Thread size (mm)
Max speed (rpm)
Max. circumferential
speed (m/s)
Tool
Cutting disc 125 3 M14 ≥11000 ≥72
Two-hole mounting
spanner
Roughing disc 125 6 M14 ≥11000 ≥72
Two-hole mounting
spanner
Storage and handling of the
recommended accessory tools
■ Grinding tools must be treated with care and
transported carefully.
■ Grinding tools should be stored in such a
way that they are not exposed to mechanical
damage or environmental influences (e.g.
damp).