6
EN – Operating instructions QEM / QET
8.GENERAL CONDITIONS
Warranty
The product warranty is subject to the general terms of sale of the Pedrollo S.p.a company.
Acknowledgement of the warranty depends on the strict and proven fullled of the ope-
rating instructions in this booklet and application of the correct mechanical, hydraulic and
electro-technical practices.
All products are covered by a warranty valid for 24 months, which covers all construction de-
fectsof our products and includes the replacement/repairs of defective parts
The warranty will not be deemed valid in the event of:
• tampering with the panel (modications without prior authorisation);
• faults due to lack of or inadequate protection and/or connection errors;
• faults caused by exceeding data plate specications;
• normal wear and tear;
• failure by installation personnel to observe the specied operating procedures;
• accidental causes, natural disasters of any kind, such as res, ooding, water or lightening;
The defective material must be delivered carriage paid to Pedrollo S.p.A., who reserves the
right to nal judgement of the cause of the said defects.
The Warranty applies exclusively to restoring the original product characteristics and does not
cover material damage or physical injury.
Maintenance
QEM/QET does not require routine maintenance provided that it is used within the operating
limits and in observance of the instructions in this manual.
Special maintenance or repairs must be performed exclusively by authorized service centers.
In the event of repairs, only original spare parts must be used.
The manufacturer declines all liability for material damage or injury to persons or animals cau-
sed by maintenance interventions performed by unauthorized personnel or using non-origi-
nal materials.
Disposal
In the event of disassembly and scrapping, strictly observe local legislation regarding pollu-
tion.
Waste disposal according to material categories is recommended.
To Next Page
Loading...
Need help?
General