PerkinElmer Lambda 1050 User Manual

Safety Practices . 13
Precautions
WARNING
Be sure that all instrument operators read and understand the
precautions listed below. It is advisable to post a copy of the
precautions near or on the instrument itself.
The following precautions must be observed when using your high-performance Lambda
spectrometer:
• Connect the instrument to a correctly installed line power outlet that has a protective
conductor (earth/ground).
• Do not attempt to make internal adjustments or replacements except as directed in this
handbook.
• Do not operate the instrument with any covers or parts removed.
• Servicing should only be carried out by a PerkinElmer Service Engineer or a similarly
authorized and trained person.
• Disconnect the instrument from all voltage sources before opening it for any
adjustment, replacement, maintenance, or repair. If, afterwards, the opened instrument
must be operated for further adjustment, maintenance, or repair, this must only be
done by a skilled person who is aware of the hazard involved.
• Only use fuses of the specified type and current rating for replacement.
• Do not use makeshift fuses or short-circuit the fuse holders.
WARNING
If the equipment is used in a manner not specified herein, then the
protection provided by the equipment may be impaired.

PerkinElmer Lambda 1050 Specifications

General

Brand	PerkinElmer
Model	Lambda 1050
Category	Laboratory Equipment
Language	English