3:2
Maintenance and trouble-shooting
Changing the needle plate
Switch off the main switch.
It is very important to clean your sewing
machine, because it will reward you with
a longer service life. The more often you
use the machine, the more care it needs.
Removal:
• Raise the sewing foot and remove the
removable accessory tray.
• Push the point of a small screwdriver
into the opening between needle plate
and sewing machine.
Twist it lightly to the right and the
needle plate will snap half way out of its
mounting. Now push the screwdriver
into the left opening and take the needle
plate out.
Replacing:
• Place the needle plate on Á at at the
back and push it down with both hands
at the front until you hear it snap in place.
Before you start sewing, check that the
needle plate is lying Á at.
Cleaning
Switch off the main switch.
• Remove the needle plate and lower
the feed dog.
• Clean the feed dog and hook area
with the brush.
To Next Page
Loading...
Need help?
General
