Phanteks EVOLV SHIFT 2 User Manual

10
SHIFT 2
SHIFT 2 air
INSTALLING POWER SUPPLY
The SFX power supply fan can be faced towards the side panel or the inside of the chassis. For the Shift 2 with
tempered glass side panels we recommend facing the inside of the chassis.
PLACE THE SFX PSU ON ITS POSITION
1.
SECURE THE SFX PSU WITH 4X PSU SCREWS
2.
CONNECT THE POWER EXTENSION CORD TO THE PSU
MAKE SURE THE PSU SWITCH IS TURNED ON
3.
PLUG-IN ALL NEEDED CABLES TO THE PSU
4.
PRE-ROUTE THE CABLES OUTSIDE THE CHASSIS
(SEE NEXT PAGE FOR MORE DETAILS)
5.
4x
REQUIRES:
Install the power supply in the correct orientation for
the best performance depending on your model
2
3

Phanteks EVOLV SHIFT 2 Specifications

General

Brand	Phanteks
Model	EVOLV SHIFT 2
Category	Computer Hardware
Language	English