15
Pause TV
You can pause a TV broadcast and resume watching
it later. Only digital TV channels can be paused. You
must connect a USB Hard Drive to buffer the
broadcast. You can pause a broadcast for a maximum
time span of 90 minutes.
For more information, press
Keywords and look
up USB Hard Drive.
Pause or resume a broadcast
To pause a broadcast, press
(Pause). A progress bar
appears briefly on screen.
To call up the progress bar, press
(Pause) again.
To resume watching, press
(Play). The icon on
screen indicates you are watching a paused
broadcast.
Back to the actual TV broadcast
To switch back to the actual TV broadcast, press
(Stop).
The moment you switch to a digital channel, the USB
Hard Drive starts buffering the broadcast. When you
switch to another digital channel, the broadcast of the
new channel is buffered and the broadcast of the
previous channel is cleared. When you switch to a
connected device (a Blu-ray Disc player or digital
receiver) the USB Hard Drive stops buffering and the
broadcast is cleared. Also when you switch the TV to
standby the broadcast is cleared.
While recording a program on the USB Hard Drive,
you cannot pause a broadcast.
Instant replay
While watching a broadcast from a digital TV channel,
you can easily instant replay the broadcast.
To replay the last 10 seconds of a broadcast,
press
(Pause) and press
(Left).
You can press
repeatedly until you reach the start
of the broadcast buffer or the maximum time span.
Progress bar
With the progress bar on screen, press
(Rewind) or
press
(Forward) to select from where you want to
start viewing the paused broadcast. Press these keys
repeatedly to change speed.
40
To Next Page
Loading...
Need help?
General