5
Connections
5.1
Connectivity guide
Always connect a device to the TV with the highest
quality connection available. Also, use good quality
cables to ensure a good transfer of picture and
sound.
When you connect a device, the TV recognizes its
type and gives each device a correct type name. You
can change the type name if you wish. If a correct
type name for a device is set, the TV automatically
switches to the ideal TV settings when you switch to
this device in the Sources menu.
5.2
Antenna
Insert the antenna plug firmly into
the Antenna socket at the back of the TV.
You can connect your own antenna or an antenna
signal from an antenna distribution system. Use an
IEC Coax 75 Ohm RF antenna connector.
Use this antenna connection for DVB-T and DVB-C
input signals.
For 32" or above
For 22"/24"
* Network port is only for UK models
** Satellite port is only for xxPxSxxxx series
5.3
Satellite (if available)
Attach the satellite F-type connector to the satellite
connection SAT at the back of the TV.
For 32" or above
For 22"/24"
13
To Next Page
Loading...
Need help?
General