Philips AVENT SCF301 User Manual

23
English
14 Troubleshooting
This chapter summarises the most common problems you could encounter
with the appliance. If you are unable to solve the problem with the
information below, contact the Consumer Care Centre in your country or visit
us online at www.philips.com/support.
Problem Solution
Lack of suction. • Check that all components are assembled correctly
and that the valve is in positioned correctly.
• Make sure that the cap, the diaphragm, and the
Massage Cushion are tted securely to the pump
body and a perfect seal is created.
• The air pressure in your region is too low, this may
aect the suction.
• Make sure the silicone tube is rmly connected to
the cap and the motor, without twisting.
No milk being
expressed.
• Make sure the pump is assembled correctly, and
the suction is created.
• Relax and try again; as expression may improve
with practice.
• Refer to the “Hints to help you succeed” section.
Pain in the
breast area when
expressing.
• You may be pumping too hard. You do not need to
use all the suction that the pump can generate but
the comfortable levels. Press the level down button
to lower down the suction intensity.
• Consult your health professional/ breast feeding
advisor.
Milk is drawn
up the Massage
Cushion.
• Remove and ret the Massage Cushion. Make sure
that it is installed correctly and rmly.
• Try leaning lightly forward.

Philips AVENT SCF301 Specifications

General

Type	Electronic
Age (max)	6 month(s)
Age (min)	0 month(s)
Product color	-
Bottle material	Polypropylene (PP)
Day breast pads	2 pc(s)
Doesn't contain	Bisphenol A (BPA)
Nipple material	Silicone
Country of origin	China
Breast pump body with handle	1 pc(s)
Travel pouch	Yes

Weight and Dimensions

Capacity	120 ml