Philips AVENT SCF301 User Manual

9
English
2 Put the bottle onto the pump
body and turn it anticlockwise
to x it. Do not over-tighten
when assembling the bottle to
the pump body.
3 Insert the Massage Cushion
into the pump funnel and press
the rim to ensure a perfect seal.
4 Put the silicone diaphragm onto
the pump body and press the
rim to make sure a perfect seal.
Tip
•
You may nd it easier to
assemble while it is wet.
4 Assembling the
electric breast
pump
To assemble the pump, follow the
steps below.
Note
•
Make sure that you clean and
sterilise the pump as instructed
in this user manual.
•
Make sure that you assemble
the pump correctly as instructed
in this user manual.
•
To avoid leakage, remove the
residue around the rim before
assembling. Put the bottle onto
the pump body, and do not
over-tighten.
•
Wash your hand thoroughly
before you take sterilised
components.
1 Insert the valve into the pump
body from underneath.

Philips AVENT SCF301 Specifications

General

Type	Electronic
Age (max)	6 month(s)
Age (min)	0 month(s)
Product color	-
Bottle material	Polypropylene (PP)
Day breast pads	2 pc(s)
Doesn't contain	Bisphenol A (BPA)
Nipple material	Silicone
Country of origin	China
Breast pump body with handle	1 pc(s)
Travel pouch	Yes

Weight and Dimensions

Capacity	120 ml