Philips CD 711 User Manual

PLAYBACK
NORMAL PLAYBACK (PLAY/REPLAY)
NOTE! Use only audio CDs; no CD-ROM, CD- 1 or CDV.
e Press POWER ON/STANDBY 7 to switch the player on.
¢ Open the CD compartment by pressing OPEN/CLOSE 7.
— OPEN lights up.
e insert an audio CD, printed side up, and close the compartment by pressing
OPEN/CLOSE 7.
DIGITAL AUDIO
English
~ CLOSE lights up, followed by READ. The number of tracks and the playing time of the CD
are shown on the display.
(eBGUYE
e Press PLAY/REPLAY 6 to start play.
You can also press PLAY/REPLAY immediately after inserting the CD; the compartment
then closes automatically.
You can also close the CD compartment by pressing its front; playback will then start
automatically.
— The number indicator shows how many tracks are on the CD; when a track has been
played its number disappears.
1623 °4 5 6 F 8 39 40 TW 42 3-4 5 6 7 8 9 410 A 42
— The track being played is always shown under TRACK and its elapsed playing time is
shown under TRACK TIME.
fate
— Play will stop after the last track.
e Press POWER ON/STANDBY 17 to switch the player off.
You can interrupt playback by pressing PAUSE 75; PAUSE then lights up.
Press PLAY/REPLAY 6 to restart; if you first press PAUSE again and then PLAY/REPLAY,
the current track starts again from the beginning.
You can also restart play by pressing SCAN 76 (on the remote control - CD727 only) or
SHUFFLE 174.
if you press PLAY/REPLAY during play, the current track starts again from the beginning.
You can stop playback by pressing STOP/CP 5 or OPEN/CLOSE 7.

Philips CD 711 Specifications

General

Brand	Philips
Model	CD 711
Category	CD Player
Language	English