Manual Recording Volume, Append Recording 45
Manual Recording Volume
You can adjust manually the volume level during recording.
1
During recording of a TV broadcast, press AUTO/MAN
REC VOLUME on the front of the DVD Recorder. The display
will show the current audio level. MANUAL appears on the display.
2
Press REC VOLUME 89 on the front of the DVD Recorder
to adjust the volume level.
3
To return to automatic audio level control, press
AUTO/MAN REC VOLUME again. MANUAL will disappear
from the display.
Append recording
To add a new video recording to an earlier recorded Title, follow these
steps. This feature is not available on DVD+Rs, which always record at the
end of the Disc.
1
In the Index Picture Screen, press 89 to select the Title to
which you want to add a recording.
2
Press PLAY :.
3
When you reach the point at which you want to start the
new recording, press PAUSE k.
4
Press MONITOR, then press CH+/- to select the channel
(or other equipment) you want to record.
5
Press REC/OTR. The new recording will start at the point you
selected and overwrite the video material beyond this point, includ-
ing later Titles.
6
Press STOP C to stop recording.
• You can not adjust the volume
manually when recording from
equipment that is connected to
the DV i-Link jack on the front
of the Recorder. This feature is
only effective when recording in
Monitor mode.
Helpful Hint
DVD+RW
DVD+RW DVD+R
To Next Page
Loading...
Need help?
General
