Philips HTL2150 User Manual

12EN
7 Troubleshooting
Warning
• Risk of electric shock. Never remove the casing of the
product.
To keep the warranty valid, never try to repair
the product yourself.
If you have problems using this product, check
the following points before you request service.
If you still have a problem, get support at
www.philips.com/support.
Main unit
The buttons on the SoundBar do not work.
• Disconnect the SoundBar from the power
supply for a few minutes, then reconnect.
Sound
No sound from SoundBar speakers.
• Connect the audio cable from your
SoundBar to your TV or other devices.
• Reset your SoundBar to its factory settings.
• On the remote control, select the correct
audio input.
• Make sure that the SoundBar is not muted.
Distorted sound or echo.
• If you play audio from the TV through the
SoundBar, make sure that the TV is muted.

Philips HTL2150 Specifications

General

Subwoofer type	Passive subwoofer
Subwoofer included	Yes
Subwoofer frequency range	45 - 200 Hz
AC input voltage	110-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Docking connector type	-
Apple docking compatibility	Not supported
Soundbar dimensions (WxDxH)	800 x 75.6 x 52.4 mm
Subwoofer dimensions (WxDxH)	165 x 295 x 240 mm
Subwoofer driver diameter (imperial)	5.25 \
Package weight	5400 g
FM radio	No
Product color	Black
Impedance	4 Ω
Number of tweeter drivers	1
Audio decoders	Dolby Digital
RMS rated power	60 W
Audio output channels	- channels
Cables included	AC
HDMI ports quantity	0
Connectivity technology	Wired

Weight and Dimensions

Cord length	3 m
Soundbar weight	1200 g
Subwoofer weight	2600 g