Philips Saeco Minuto HD8772 User Manual

21 ENGLISH 21
Adjusting the Beverage Cup Length
The machine allows you to adjust the amount of brewed co ee according
to your taste and the size of your cups.
Each time the “
”, “ ” or “ ” button is pressed, the machine brews a
pre-set amount of beverage. Each button may be individually programmed
for a speci c brew setting.
The following procedure describes how to program the “
” button.
1
Place a cup under the dispensing spout.
Green
3
Press and hold the “ ” button until the “MEMO” icon appears on
the display, then release the button. The machine has now entered
programming mode.
The machine starts brewing co ee.
4
Press the “ ” button as soon as the desired amount of co ee is
reached.
Now the “
” button is programmed; each time it is pressed, the machine
will brew the same amount of espresso that was just programmed.
Note:
To program the other two “
” or “ ” beverages, the same steps should
be followed. You should always use the “
” button to stop brewing
co ee when the desired amount of co ee is reached even when you are
programming the other two “
”or “ ” beverages.
Green
2
Check the position of the selection lever.

Philips Saeco Minuto HD8772 Specifications

General

Cord length	0.8 m
Control type	Buttons
Display type	LCD
Product color	Black, Silver
Housing material	Plastic
Drip/spout adjustment	Vertical
Removable brewing/infusion unit	Yes
Product type	Espresso machine
Capacity in cups	- cups
Coffee input type	Coffee beans, Ground coffee
Coffee maker type	Fully-auto
Appliance placement	Countertop
Water tank capacity	1.8 L
Coffee beans capacity	250 g
Number of grinder settings	5
Reservoir for brewed coffee	Cup
AC input voltage	120 V
AC input frequency	60 Hz
Pump pressure	15 bar
Fully automatic	Coffee
Country of production	Other Europe

Weight and Dimensions

Depth	429 mm
Width	215 mm
Height	330 mm
Weight	7500 g