5 Reset the
earpieces
If you encounter any pairing or
connection issue, you can follow the
following procedure to reset your
earpieces to factory default value.
On your Bluetooth device, go to the
Bluetooth menu and remove Philips
TAT1207 from the device list.
Turn o the Bluetooth function of
your Bluetooth device.
Return earpieces to charging box
and open the lid.
Press button on box twice.
Follow steps in “Use your earpieces-
connect the earpieces to your
Bluetooth device.”
Pair the earpieces with your
Bluetooth device, select Philips
TAT1207.
If there is no response from the
earpieces, you can follow the below
step to reset the hardware of your
earpieces.
Tap and hold multi-function touch
for 10 seconds.
1
2
3
4
5
6
10 EN
6 Technical data
Music play time: 6 + 18 hours
Talk time: 6 hours
Standby time: 150 hours
Charging time: 2 hours
Lithium-ion battery 40 mAh on
each earpiece, Lithium-ion battery
400 mAh on charging box
Bluetooth version: 5.2
Compatible Bluetooth proles:
• HFP (Hands-Free Prole)
• A2DP (Advanced Audio
Distribution Prole)
• AVRCP (Audio Video Remote
Control Prole)
Supported audio codecs: SBC
Frequency range: 2.402-2.480 GHz
Transmitter power: < 10 dBm
Operating range: Up to 10 meters
(33 feet)
USB-C port for charging
Low battery warning: available
Specications are subject to change without
notice.