9. Connect to video camera (DVT7110 only)
You can use your VoiceTracer as an external microphone for
a video or DSLR camera. This ensures the best audio quality
for your videos.
To connect your VoiceTracer to your
video camera:
1. Screw the hot shoe adapter into the tripod thread on
the back of your VoiceTracer.
2. Slip the hot shoe adapter into your camera’s hot shoe.
Make sure to direct the front of your VoiceTracer in the
direction you want to record.
3. Use both adjusting screws on the hot shoe adapter to
ensure that your VoiceTracer is xated on your video
camera / DSLR camera.
4. Insert the audio cable into the headphones jack on the
left side of your VoiceTracer.
5. Insert the other end of the audio cable into the external
microphone jack of your video camera.
6. In stop mode, press the Right function button to
open the settings panel. Select Scene and press the
Record button, then select Video from the list and con-
rm with the Record button.
X The Video scene main screen is displayed in red. You
can also see the current audio levels for both channels
on the bottom half of the screen.
7. Start recording the video on your video camera / DSLR
camera.
NOTE
In the Video scene the VoiceTracer operates
as an external microphone, this means audio
is not stored on your VoiceTracer. The audio
is recorded and stored on your video cam-
era / DSLR camera.
8. To exit the Video scene, press the Left function button.
16
To Next Page
Loading...
Need help?
General
