Swimming pool heat pump
- 17 -
Confirm whether the unit is installed with leakage protective
switch. If not, it can cause personal electric shock or fire.
The appliance shall be installed in accordance with national
wiring regulations.
USAGE
WARNING
Do not insert fingers, rods or other objects into the air outlet.
When the fan is rotating at high speed, it will cause injury.
In order to avoid electric shock, fire or injury, if any
abnormality is detected, such as smell of fire, turn off the
power supply and call your supplier for instructions.
Never touch the internal parts of the controller.
MOVE AND
MENDIGN
WARNING
When hot water heat pump is moved and re-installed, clients
have to let distributors or professional technicians to do it. If
the unit is not well installed, electric shock, fire, injure and
water leakage would probably occur.
Absolutely no mending by user himself, or this will probably
lead to electric shock and fire.
Ask your supplier for the repair and maintenance. Incomplete
repair and maintenance may result in water leakage, electric
shock or fire.
USAGE
NOTICE
ITEMS
Before cleaning, be sure to stop the operation and turn the
breaker off or pull out the power cord. Otherwise, an electric
shock and injury may be caused.
Never replace a fuse with that of wrong rated current or other
wires when a fuse blows out. Use of wrong wire or copper
wire may cause the unit to break down or a fire.
Never use a flammable spray such as hair spray, lacquer
paint near the unit. It may cause a fire.
Do not dispose this product as unsorted municipal waste.
Collection of such waste separately for special treatment is
necessary.
Do not use the swimming pool heat pump for other purposes.
In order to avoid injury, do not remove the fan guard on the
unit.
Do not operate swimming pool heat pump with a wet hand.
An electric shock may be caused.
To Next Page
Loading...
Need help?
General
