MINI MCR-SL-UI-UI
101945_en_05 PHOENIX CONTACT 3
3.1 Order key
(standard configuration entered as example)
Description Type Order No. Pcs. / Pkt.
MCR 3-way isolating amplifier, I/O can be configured via DIP switches, for
the electrical isolation of analog signals, with screw connection, order con-
figuration
MINI MCR-SL-UI-UI 2864383 1
MCR 3-way isolating amplifier, I/O can be configured via DIP switches, for
the electrical isolation of analog signals, with spring-cage connection,
order configuration
MINI MCR-SL-UI-UI-SP 2864710 1
3-way isolating amplifier for the electrical isolation of analog signals, I/O
can be configured via DIP switches, with screw connection, standard con-
figuration
MINI MCR-SL-UI-UI-NC 2864150 1
MCR 3-way isolating amplifier, I/O can be configured via DIP switches, for
the electrical isolation of analog signals, with spring-cage connection, stan-
dard configuration
MINI MCR-SL-UI-UI-SP-NC 2864163 1
Accessories Type Order No. Pcs. / Pkt.
DIN rail connector (TBUS), 5-pos., for bridging the supply voltage, can be
snapped onto NS 35/... DIN rails according to EN60715
ME 6,2 TBUS-2 1,5/5-ST-3,81 GN 2869728 10
MCR power terminal block for supplying several MINI Analog modules via
the T-connector, with screw connection, maximum current consumption of
up to 2A
MINI MCR-SL-PTB 2864134 1
MCR power terminal block for supplying several MINI Analog modules via
the T-connector, with spring-cage connection, maximum current consump-
tion of up to 2A
MINI MCR-SL-PTB-SP 2864147 1
DIN rail power supply unit, primary-switched mode, slim design, output: 24
V DC / 1.5 A
MINI-SYS-PS-100-240AC/24DC/1.5 2866983 1
DIN rail power supply unit, primary-switched mode, slim design, output: 24
V DC / 1.5 A, ATEX approval
MINI-PS-100-240AC/24DC/1.5/EX 2866653 1
Eight MINI analog signal converters with screw connection method can be
connected to a control system using a system adapter and system cabling
with a minimum of wiring and very low error risk.
MINI MCR-SL-V8-FLK 16-A 2811268 1
Fold up transparent cover for MINI MCR modules with additional labeling
option using insert strips and flat Zack marker strip 6.2 mm
MINI MCR DKL 2308111 10
Label for extended marking of MINI MCR modules in connection with the
MINI MCR-DKL
MINI MCR-DKL-LABEL 2810272 10
Order No. Input range Output range Factory calibration certificate
2864383 / IN03 / OUT01 / NONE
IN01 = 0 ... 20 mA OUT01 = 0 ... 20 mA NONE = Without factory calibration certificate
2864383 = IN02 = 4 ... 20 mA OUT02 = 4 ... 20 mA YES = With factory calibration certificate (a fee is charged)
...-UI-UI IN03 = 0 ... 10 V OUT03 = 0 ... 10 V
IN04 = 2 ... 10 V OUT04 = 2 ... 10 V
2864710 = IN05 = 0 ... 5 V OUT05 = 0 ... 5 V YESPLUS = Factory calibration certificate with 5 measuring
points (a fee is charged)
...-UI-UI-SP IN06 = 1 ... 5 V OUT06 = 1 ... 5 V
To Next Page
Loading...
Need help?
General
