SUSPENSION - APE TM KAT - APE TM P703 FL2
Specification Desc./Quantity
Front suspension Built using helical spring.
Rear suspension Built with flexible rubber components in progressive rate. Sus-
pensions consist of hydraulic shock absorbers.
TYRES - APE TM KAT - APE TM P703 FL2
Specification Desc./Quantity
Wheel rim From 3.50".
Front tyre (handlebar version) 4.00-12CNTL
Rear tyre (handlebar version) 125R12C XZX TL
Front tyre (steering wheel version) 125R12C XZX TL
Rear tyre (steering wheel version) 125R12C XZX TL
Front tyre pressure 2.5 bar
Rear tyres - inflation pressure 4.5 bar
REFILLING - APE TM KAT - APE TM P703 FL2
(*)= specific for versions with tipper deck.
Litres (l) Deck Long
Deck
Van Tipper
Fuel tank (reserve) 15 (3.5) 15 (3.5) 15 (3.5) 15 (3.5)
Engine oil (reserve) 3.2 (0.75) 3.2 (0.75) 3.2 (0.75) 3.2 (0.75)
Hydraulic oil (reserve) (*) 15 (3.2) 15 (3.2) 15 (3.2) 15 (3.2)
Tightening torques
ENGINE UNIT
Name
Torque in Nm
Transmission cross control stem 35 to 40 Nm (a)
3rd and 4th speed cross control stem 19 to 21 Nm (b)
1st and 2nd speed cross control stem 25 to 30 Nm (b)
Spark plug 18 to 24 Nm
Bolts locking dynamotor to differential crankcase 30 to 35 Nm
Bolts locking dynamotor to engine crankcase 20 to 25 Nm
Clutch assembly locking nut 180 to 220 Nm
Multi-gear pin nut 35 to 40 Nm
Fan flywheel locking nut 60 to 65 Nm
Silencer manifold fixing nut 19 to 21 Nm
Silencer to crankcase fixing bolts 18 to 22 Nm
Clutch cover fixing bolt 13 to 17 Nm
Cylinder head fixing bolt 20 to 23 Nm
Engine to deck fixing bolt 20 - 25 Nm
Spring line to frame fixing bolt 20 - 25 Nm
Spring line to frame anchor bolt 20 to 25 Nm
Oil drain plug 22 to 25 Nm
Bolt connecting the crankcase halves 13 to 15 Nm
Dynamotor pulley lock nut 35 to 40 Nm
Crankcase admission joint lock bolts 14 to 18 Nm
Change control support lock bolts 14 to 18 Nm
(a)= Specific for version with handlebar
(b)= Specific for version with steering wheel
DIFFERENTIAL UNIT
Name
Torque in Nm
Differential box toothed sprocket lock bolts 54 to 64 Nm
Differential cover fixing bolt 30 to 40 Nm
Characteristics APE TM Benzina
CH - 18
To Next Page
Loading...
Need help?
General
