TOOL KIT
The included tool kit is composed of:
- 1 four-ended box wrench (11-14-21-22 mm);
- 2 double open-ended wrenches (11 -14 and 7-10 mm);
- 1 single open-ended wrench (8 mm); and
- 1 screwdriver.
These tools are contained in a canvas roll which is placed in the left wing together with this
booklet and the test card.
ACCESSORIES
On request the Vespa 150 can be equipped with following accessories (see Fig. 13):
- Rear saddle of the nose pivoted, sprung type, to be secured to three chassis holes after
removing the luggage rack. The central spring is adjustable to the rider’s weight.
- A pillion seat, of foam rubber, can be used instead of the rear saddle. The seat can be
secured to the rear luggage rack of the scooter. Both rear saddle and foam rubber seat are
small and attractive looking and give remarkable comfort to the passenger, thus completing
the efficiency of suspension.
- Spare wheel and bracket. The wheel can be secured in two ways to the scooter: in front,
by a light alloy bracket secured to the scooter longeron by means of two screws; or at the
rear, by a steel sheet pressing, provided with spacers, to be clamped onto the frame, under
the luggage carrier or the rear saddle, by means of the three screws securing the latter.
19
To Next Page
Loading...
Need help?
General