WITH GASOLINE AS SOON AS POSSIBLE. IF YOU DO NOT DO THIS, YOU
COULD DAMAGE THE FUEL PUMP AND/OR THE CATALYTIC CONVERTER.
02_05
Shock absorbers adjustment (02_05, 02_06)
Spring pre-loading can be regulated on four positions using a special shock absorber
wrench, turning the ring nut at the bottom of the shock absorbers.
Position 1: minimum pre-load: rider only
Position 2 medium pre-loading: rider only
Position 3 medium pre-loading: rider and passenger
Position 4: maximum pre-loading: rider, passenger and luggage.
02_06
Spring pre-loading increases by turning the ring nut towards «A», but decreases if the
ring nut is turned towards «B».
CAUTION
RIDING THE VEHICLE WITH THE SPRING PRE-LOADING NOT CORRECTLY SET
FOR THE RIDER AND POSSIBLE PASSENGER, COULD REDUCE THE COM-
FORT OF THE RIDE AND THE PRECISION OF THE STEERING.
WARNING
WE RECOMMEND WEARING GLOVES WHILE CARRYING OUT THIS OPERA-
TION IN ORDER TO AVOID INJURIES.
41
To Next Page
Loading...
Need help?
General