Introduction6
Copyright © 2012-2013 Pico Technology Limited. All rights reserved.ps3000ab.en r5
1.9
Minimum system requirements
To ensure that your PicoScope 3000 Series oscilloscope operates correctly, you must
have a computer with at least the minimum system requirements to run one of the
supported operating systems, as shown in the following table. The performance of the
oscilloscope will be better with a more powerful PC, and will benefit from a multi-core
processor.
Recommended
full specification
Windows XP SP3, Windows Vista, Windows 7, Windows 8*
32 bit and 64 bit versions supported
Ports (USB 2.0
oscilloscopes)
Ports (USB 3.0
oscilloscopes)
* Not Windows RT.
** The PicoScope software does not use all the disk space specified in the table.
The free space is required to make Windows run efficiently.
1.10
Cleaning
Clean the oscilloscope using a soft cloth dampened with a solution of mild soap or
detergent in water.
CAUTION: Do not allow water to enter the oscilloscope casing, as this could damage
the sensitive electronic components inside.