WARRANTY | SERVICE
CERTIFICATION | CONFORMITY
Extend the warranty of your PIEPS DSP PRO/DSP SPORT
from 2 to 5 years: With the PIEPS warranty extension you have the possibility to extend the standard
warranty of your PIEPS DSP PRO/DSP SPORT free of charge. Simply register online at www.pieps.com
and get your warranty certicate for 5 years valid from the date of purchase. The warranty can be
extended within 3 months from the date of purchase.
The device is guaranteed by the manufacturer against defects in material and
workmanship for a period of 2 years from the date of purchase. This warranty does not apply to damage
caused by incorrect use, dropping or dismantling of the device by unauthorized persons. Any further
warranty or liability for consequential damage is expressly excluded. • Warranty claims should be
addressed - enclosing the receipt of purchase - to the relevant sales outlet.
Service: To use the advantages of exclusive PIEPS services, you have to register on the PIEPS Service-
Portal. Do Firmware Updates on your own. Make an extensive beacon check. Activate/deactivate the
function Auto-Search-to-Send. You get a competent support in one of the numerous PIEPS Service
Center. An overview of the PIEPS Service Center can be found on www.pieps.com. If there are any
questions please contact support@pieps.com.
Manufacturer: PIEPS GmbH; Country of manufacture: Austria; Model: PIEPS DSP02; The
device complies with the Standard ETS 300718 WEEE 2002/96/EC; Canada: IC: 7262A-DSP02; USA:
FCC ID: REMDSP02; This device complies with Part 15 of the FCC Rules and IC RSS-210. Operation is
subject to the following two conditions: 1) This device may not cause harmful interference, and 2) this
device must accept any interference received, including interference that may cause undesired operation.
Warning: Any changes or modications not expressly approved by the manufacturer, responsible for
compliance, could void the user’s authority to operate this device. On the device, the certication codes
and serial number can be found within the battery compartment.
PIEPS GmbH declares hereby, that the product PIEPS DSP02 fulls all requirements and
regulations of directive 1999/5/EC. The declaration of conformity can be downloaded at the following
source: http://www.pieps.com/certication
Manufacturer, Sales & Service
PIEPS GmbH, Parkring 4, 8403 Lebring, Austria, ofce@pieps.com, www.pieps.com
All information is supplied without liability. 08/2013
To Next Page
Loading...
Need help?
General
