SEARCH mode / SCAN function
Another highly useful feature of the PIEPS DSP is the SCAN function.
Press the SCAN key in the SEARCH mode and the device will begin scanning the
entire receiving range. During the scan, stand still and hold the device steady.
This will give you an overview of all the victims' devices within the detectable range,
classified according to three groups:
Reading 1: within a distance of approx. 5m
All information from previously suppressed signals is now reset and you can start the
suppression again (MARK).
!
!
IMPORTANT: Once you have located all victims, move away from their locations
in a star shape and use the SCAN function to check the scenario again. That way
you can make sure you haven't missed any other victims.
! Reading 2: within a distance of approx. 20m
Reading 3: within a distance of approx. 50m
To Next Page
Loading...
Need help?
General
